Free-standing Bodur series security safes are distinguished by their thin-wall and lightweight construction.

The door and walls are filled with specially patented
armouring and specialty concretes.

All safes have a full-circumference fire seam and offer fire protection in addition to defined burglary protection.

Bodur series cabinets, regardless of their safety level, all have the same internal and external dimensions within a
specific safe size.

The safe body and door are protected against attack by
thermal and mechanical tools.

For all safe types, a 3-way compact locking mechanism is used, which has been tested over many years, with two lock positions and inside emergency locking mechanisms.

If lock retrofitting is necessary at a later time, this can be done effortlessly without any annoying cable guides.

   

Product description: WWS Classes I to IV

- Tested at the VdS testing laboratory in Cologne
- Certified to EN1143-1 at VdS (Vds 2450) and ECB-S (ECB-S C01)
- Door thickness: approx. 120mm
- Wall thickness: approx. 40mm
- Door opening angle 145 degrees
- Door stop on right
- 3-way locking mechanism with interior emergency locks and two lock
positions
- Up to the “150” size, there is a flat bolt on the lock side and one round
bolt each at the top and bottom; on the “180” size there are 3 flat bolts
on the lock side and one round bolt each at the top and bottom.
- Black aluminium handle, protruding
- Classes I to III each have a standard high-security key lock conformant
to EN1300; Class IV has two locks
- Up to the “120” size, hinges are on the interior
- “150 and 180“ has exterior hinges
- Safe have EMA preparation from Resistance Grade III
- Standard floor anchoring, bored through, and 1 anchorage on the back
wall not bored through
- Anchoring materials included for floor anchoring
- 1 cable entry in the back and side wall, not bored through (1cm²)
- Standard RAL colour: RAL 7035